LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1410 (Interior Trim) >> Repair Instructions >> Jack and Tool Stowage Container Bracket Replacement (Envoy XUV) >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Oldsmobile Bravada, 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the jack stowage cover. Refer to Cover Replacement - Jack Stowage (Envoy XUV) .
    Fig 1: Removing/Installing Jack & Tool Stowage Container Bracket (Envoy XUV)
    GM1237405Courtesy of GENERAL MOTORS CORP.
  2. Remove the nut (3) retaining the tool package (4) to the jack bracket.
  3. Remove the nuts (1) retaining the jack bracket to the floor studs.
  4. Remove the jack bracket from the vehicle.
scientia non olet · About LEMON Manuals