LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1410 (Interior Trim) >> Repair Instructions >> Garnish Molding Replacement - Body Side Window - Front (TrailBlazer EXT, Envoy XL) >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Oldsmobile Bravada, 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Garnish Molding - Body Side Window - Front (TrailBlazer EXT, Envoy XL)
    GM798350Courtesy of GENERAL MOTORS CORP.
  1. Remove the bolt that retains the seat belt upper anchor to the body.
  2. Remove the garnish molding from the vehicle.
scientia non olet · About LEMON Manuals