LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1410 (Interior Trim) >> Repair Instructions >> Door Sill Plate Replacement - Front >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Oldsmobile Bravada, 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. If removing the right sill plate, remove the right insulator panel. Refer to Closeout/Insulator Panel Replacement - Right .
    2. Fig 1: Removing/Installing Door Sill Plate - Front
    GM714032Courtesy of GENERAL MOTORS CORP.
  2. Starting at the rear of the sill plate, use a flat-bladed tool in order to release the 5 retaining tabs.
  3. If removing the left sill plate, remove the sill plate from the hood release handle.
  4. Remove the sill plate from the door frame.
  5. Remove any retaining tabs that remain attached to the door frame.
scientia non olet · About LEMON Manuals