Removal Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Oldsmobile Bravada, 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Cover - Rear Seat Floor Trim Panel Stud (Envoy XUV)

Courtesy of GENERAL MOTORS CORP.

Raise the mid-gate to the up position.
Fold the left rear seat to the cargo position.
Pull the rear seat floor stud cover (1) straight up off of the seat rest (2) to disengage the retaining clips.
Remove the rear seat floor stud cover from the vehicle