LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1406 (Lighting Systems) >> Repair Instructions >> Park/Turn Signal/Side Marker Lamp Bulb Replacement (Rainier) >> Installation Procedure

Installation Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Oldsmobile Bravada, 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Removing/Installing Headlamp (Bravada & Rainier)
    GM742006Courtesy of GENERAL MOTORS CORP.
  1. Install the turn signal/park bulb (3) to the socket.
  2. Wipe the bulb with a clean cloth to ensure the bulb is free of any dirt or oil.
  3. Install the bulb and socket to the headlamp by rotating the bulb and socket clockwise, locking the retaining tabs to the headlamp.
  4. Install the headlamp. Refer to Headlamp Bulb Replacement (TrailBlazer)  or Headlamp Bulb Replacement (Bravada, Envoy, Envoy XUV, Rainier) .
  5. Close the hood.
scientia non olet · About LEMON Manuals