Installation Procedure
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Oldsmobile Bravada, 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
- Replace a high beam bulb with another high beam bulb. The high beam bulb has a black socket.
- Replace a low beam bulb with another low beam bulb. The low beam bulb has a gray tip and a grey socket.
- Connect the electrical connector to the socket.
- Position the bulb and socket to the headlamp.
- Install the bulb and socket to the housing by rotating the bulb and socket clockwise, locking the retaining tabs to the housing.
- Install the access cover to the rear of the headlamp assembly