LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1406 (Lighting Systems) >> Repair Instructions >> Hazard and Turn Signal Flasher Replacement >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Oldsmobile Bravada, 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the left closeout/insulator panel. Refer to Closeout/Insulator Panel Replacement - Left in Instrument Panel, Gages and Console.
    2. Fig 1: Accessing Hazard & Turn Signal Flasher
    GM763321Courtesy of GENERAL MOTORS CORP.
  2. Remove the flasher retaining bracket from the insulator panel.
  3. Disconnect the flasher from the electrical connector.
  4. Remove the flasher from the vehicle.
scientia non olet · About LEMON Manuals