LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1406 (Lighting Systems) >> Repair Instructions >> Dome and Reading Lamp Bulb Replacement >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Oldsmobile Bravada, 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Rear Lens Retaining Tab
    GM729429Courtesy of GENERAL MOTORS CORP.
  1. Carefully grasp the sides of the lens to partially expose the rear retaining tab.
  2. Use a flat bladed tool in order to release the rear lens retaining tab.
  3. Lower the rear edge of the lens away from the headliner.
  4. Move the lens rearward in order to release the front horizontal retaining tab.
  5. Fig 2: Removing/Installing Lens
    GM729430Courtesy of GENERAL MOTORS CORP.
  6. Remove the lens from the headliner.
  7. Fig 3: Identifying Reading Lamp Bulb & Reflector
    GM762152Courtesy of GENERAL MOTORS CORP.
  8. If replacing the reading lamp bulb (1), remove the reflector (2) from the dome lamp.
  9. Remove the reading lamp bulb from the socket.
  10. Fig 4: Identifying Dome Lamp Bulb
    GM762153Courtesy of GENERAL MOTORS CORP.
  11. If replacing the dome lamp bulb (1), remove the dome lamp bulb from the socket.