LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1406 (Lighting Systems) >> Repair Instructions >> Cargo Lamp Replacement (Envoy XUV) >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Oldsmobile Bravada, 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Locating Cargo lamp Lens Slot
    GM1207362Courtesy of GENERAL MOTORS CORP.
  1. Insert a flat-bladed tool into the slot located at the bottom of the cargo lamp lens.
    2. Fig 2: Removing/Installing Cargo Lamp
    GM1200024Courtesy of GENERAL MOTORS CORP.
  2. Using the tool, carefully apply upward pressure to the cargo lamp. The upward pressure will cause the snap feature (1) to flex.
  3. While maintaining the upward pressure. Remove the lower portion of the cargo lamp from the body trim panel.
  4. Remove the upper portion of the cargo lamp from the trim panel.
  5. Rotate the bulb socket and remove the socket from the cargo lamp.
  6. Remove the cargo lamp from the vehicle.
scientia non olet · About LEMON Manuals