LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1406 (Lighting Systems) >> Repair Instructions >> Cargo Lamp Replacement (Envoy XUV) >> Installation Procedure

Installation Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Oldsmobile Bravada, 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Removing/Installing Cargo Lamp
    GM1200024Courtesy of GENERAL MOTORS CORP.
  1. Position the cargo lamp to the trim panel.
  2. Install the bulb socket until fully seated to the cargo lamp.
  3. Install the locating tab located at the bottom of the cargo lamp to the trim panel.
  4. Push the upper portion of the cargo lamp into the trim panel ensuring the snap feature (1) is fully seated.
scientia non olet · About LEMON Manuals