LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1403 (Battery, Charging System And Starting System) >> Repair Instructions >> Battery Negative Cable Replacement (5.3L Engine) >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Oldsmobile Bravada, 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Battery Cable Components
    GM899613Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the negative battery cable (5). Refer to Battery Negative Cable Disconnect/Connect Procedure .
  2. Remove the ground terminal bolt (3) that secures the harness to the front fender.
    3. Fig 2: View Of Generator Cable Boot, Head, Nut & Bolt
    GM899614Courtesy of GENERAL MOTORS CORP.
  3. Remove the ground cable bolt (4) that secures the harness to the shock tower.
  4. Remove the ground cable clip from the shock tower.
    5. Fig 3: View Of Ground Terminal Bolt
    GM899615Courtesy of GENERAL MOTORS CORP.
  5. Remove the ground terminal bolt from the engine block.
  6. Remove the cable from the engine harness conduit.
scientia non olet · About LEMON Manuals