LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1403 (Battery, Charging System And Starting System) >> Repair Instructions >> Battery Negative Cable Replacement (4.2L Engine) >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Oldsmobile Bravada, 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnect/Connect Procedure .
    2. Fig 1: Harness Bolts
    GM754359Courtesy of GENERAL MOTORS CORP.
  2. Remove the bolt that secures the harness to the front wheelhouse panel (1).
  3. Remove the bolt that secures the harness to the shock tower (2).
  4. Remove the harness from the engine harness bracket.
  5. Remove the bolt that secures the harness to the engine block.
scientia non olet · About LEMON Manuals