LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1401 (Instrument Panel System Displays, Gauges And Console) >> Repair Instructions >> Knee Bolster Replacement >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Oldsmobile Bravada, 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the left closeout/insulator panel. Refer to Closeout/Insulator Panel Replacement - Left .
  2. Remove the knee bolster trim panel. Refer to Trim Panel Replacement - Knee Bolster .
    3. Fig 1: Removing/Installing Knee Bolster
    GM712844Courtesy of GENERAL MOTORS CORP.
  3. Remove the 4 knee bolster retaining nuts.
  4. Remove the knee bolster from the steering column support bracket.
scientia non olet · About LEMON Manuals