LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1401 (Instrument Panel System Displays, Gauges And Console) >> Repair Instructions >> Closeout/Insulator Panel Replacement - Instrument Panel (I/P) Lower (GMC/Chevrolet) >> Installation Procedure

Installation Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Oldsmobile Bravada, 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Removing/Installing Closeout/Insulator Panel - Instrument Panel (I/P) Lower (GMC/Chevrolet)
    GM718760Courtesy of GENERAL MOTORS CORP.
  1. Install the closeout panel to the vehicle.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the 4 screws that retain the closeout panel to the IP.

    Tighten:  Tighten the screws to 1.9 N.m (17 lb in).

  3. Install the floor console. Refer to Console Replacement 
scientia non olet · About LEMON Manuals