Throttle Position Sensor: Installation
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
With the throttle closed, install TP sensor and "O" ring seal onto throttle shaft. Rotate TP sensor in order to align mounting holes. Install and tighten TP sensor mounting screws to specification. See TORQUE SPECIFICATIONS . To complete installation, reverse removal procedure.