Oxygen Sensors: Removal
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
- Turn ignition off. Raise and support vehicle. Ensure oxygen sensor is free of contaminants. DO NOT use cleaning solvents of any type. Oxygen sensor may be difficult to remove when engine temperature is less than 120°F (48°C). Excessive removal force may damage threads in exhaust pipe.
- Disconnect harness connector from appropriate HO2S. Carefully remove HO2S from exhaust pipe using Oxygen Sensor Tool (J-39194-B).