LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 14 (Disc Brakes & Drum Brakes) >> Removal & Installation >> Wheel Cylinder >> Removal & Installation ("G", "L", "M", "S" & "T" Series)

Removal & Installation ("G", "L", "M", "S" & "T" Series)

WARNING: This page does not describe the selected car, but rather 46 other vehicles, including the 2001 Pontiac Montana, 2001 Pontiac Aztek, 2001 Oldsmobile Silhouette, 2001 Oldsmobile Bravada, and 2001 GMC Sonoma. However, it is still accessible from the selected car via links, so may be relevant.

Remove rear brake shoes. See REAR BRAKE SHOES . Disconnect brake line from wheel cylinder. Remove brake cylinder retaining bolts and brake cylinder. To install, reverse removal procedure. Bleed brake system. See MANUAL BLEEDING  or PRESSURE BLEEDING  under BLEEDING BRAKE SYSTEM.