LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1395 (Seat System) >> Repair Instructions >> Seat Switch Replacement - Power >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Oldsmobile Bravada, 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the switch bezel assembly from the seat assembly. Refer to Seat Switch Bezel Replacement .
  2. Remove the buttons from the switch.
  3. Release the tabs that retain the seat switch to the seat bezel assembly.
    4. Fig 1: View Of Bulkhead Connector
    GM752953Courtesy of GENERAL MOTORS CORP.
  4. Disconnect the electrical connector from the switch.
  5. Remove the seat switch from the seat bezel assembly.
scientia non olet · About LEMON Manuals