LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1395 (Seat System) >> Repair Instructions >> Seat Riser Latch Assembly Replacement - Rear No. 2 >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Oldsmobile Bravada, 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Removing/Installing Seat Riser Latch Assembly At Outer Riser Assembly Stud
    GM824157Courtesy of GENERAL MOTORS CORP.
  1. Lift the seat cushion to expose the seat riser latch assembly (2).
  2. Remove the seat riser latch assembly (2) from the outer riser assembly stud (1).
    3. Fig 2: Removing/Installing Seat Riser Latch Assembly At Seat Latch Rod
    GM824156Courtesy of GENERAL MOTORS CORP.
  3. Remove the seat riser latch assembly (1) from the seat latch rod (2).
scientia non olet · About LEMON Manuals