LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1395 (Seat System) >> Repair Instructions >> Seat Replacement - Rear No. 1 (TrailBlazer EXT, Envoy XL, Envoy XUV) >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Oldsmobile Bravada, 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the communication interface module if removing the right-hand rear seat. Refer to Communication Interface Module Replacement (TrailBlazer, Envoy, Bravada) or Communication Interface Module Replacement (TrailBlazer EXT, Envoy XL) in Cellular Communications.
    2. Fig 1: Removing/Installing Seat - Rear No. 1 (TrailBlazer EXT, Envoy XL, Envoy XUV)
    GM827901Courtesy of GENERAL MOTORS CORP.
  2. Remove the front 2 rear seat mounting nuts (2) securing the seat to the vehicle.
  3. Fold the seat to the stowed position.
  4. Remove the rear 2 rear seat mounting nuts (2) securing the seat to the vehicle.
  5. Remove the seat from the vehicle.
scientia non olet · About LEMON Manuals