LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1395 (Seat System) >> Repair Instructions >> Seat Latch Rod Replacement - Rear No. 2 >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Oldsmobile Bravada, 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the seat from the vehicle. Refer toSeat Replacement - Rear No. 2 .
    2. Fig 1: Underside Of Seat View
    GM824146Courtesy of GENERAL MOTORS CORP.
  2. Remove the two bolts (2) securing the rear seat cushion assembly (1) to the seat latch rod (3).
  3. Remove the seat riser latch assembly (1) from the seat latch rod (2).
    Fig 2: Removing/Installing Seat Riser Latch Assembly At Seat Latch Rod
    GM824156Courtesy of GENERAL MOTORS CORP.
    4. Fig 3: Identifying Seat Latch Rod Retainer Nut
    GM824155Courtesy of GENERAL MOTORS CORP.
  4. Remove the retainer nut (2) from each end of the seat latch rod (1).
  5. Remove the seat latch rod.
scientia non olet · About LEMON Manuals