LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1395 (Seat System) >> Repair Instructions >> Seat Cushion Trim Panel Replacement - Rear No.1 (TrailBlazer EXT, Envoy XL, Envoy XUV) >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Oldsmobile Bravada, 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the seat from the vehicle. Refer to Seat Replacement - Rear No. 1 (TrailBlazer EXT, Envoy XL, Envoy XUV) .
  2. Remove the rear seat bracket trim covers (1).
    Fig 1: Identifying Rear Seat Bracket Trim Covers & Rear Seat Bracket Mounting Nuts
    GM828144Courtesy of GENERAL MOTORS CORP.
  3. Remove the rear seat bracket mounting nuts (2).
  4. Remove the rear seat bracket.
  5. Fig 2: Locating Seat Cushion Trim Panel Support Bolts
    GM828229Courtesy of GENERAL MOTORS CORP.
  6. Remove the 2 bolts (2) securing the support (1) to the seat cushion trim panel.
  7. Fig 3: Identifying Seat Cover J Strips
    GM828226Courtesy of GENERAL MOTORS CORP.
  8. Remove the seat cover J-strips (1) from the seat cushion trim panel (2).
  9. Fig 4: Locating Seat Cushion Trim Panel To Seat Frame Screws
    GM828146Courtesy of GENERAL MOTORS CORP.
  10. Remove the screws securing the seat cushion trim panel to the seat frame.
  11. Remove the seat cushion trim panel.