LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1395 (Seat System) >> Repair Instructions >> Seat Cushion Latch Release Assembly Replacement - Rear No. 1 (TrailBlazer, Envoy, Bravada) >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Oldsmobile Bravada, 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the rear seat cushion assembly from the vehicle. Refer to Seat Cushion Replacement - Rear No. 1 (TrailBlazer, Envoy, Bravada) .
  2. Remove the rear-seat cushion cover and the pad. Refer to Seat Cushion Cover and Pad Replacement - Rear No. 1 (TrailBlazer, Envoy, Bravada)  or Seat Cushion Cover and Pad Replacement - Rear No. 1 (TrailBlazer EXT, Envoy XL, Envoy XUV) .
    3. Fig 1: Removing/Installing Strap From Rear Seat Cushion Latch Release Assembly - Rear No. 1 (TrailBlazer, Envoy, Bravada)
    GM753718Courtesy of GENERAL MOTORS CORP.
  3. Remove the strap (1) from the rear seat cushion latch (2).
    4. Fig 2: Removing/Installing Seat Cushion Latch Release Assembly - Rear No. 1 (TrailBlazer, Envoy, Bravada)
    GM753717Courtesy of GENERAL MOTORS CORP.
  4. Remove the 3 bolts securing the rear seat cushion latch to the seat pan.
scientia non olet · About LEMON Manuals