LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1395 (Seat System) >> Repair Instructions >> Seat Cushion Cover and Pad Replacement - Rear No. 1 (TrailBlazer EXT, Envoy XL, Envoy XUV) >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Oldsmobile Bravada, 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Seat Cover J Strips
    GM828226Courtesy of GENERAL MOTORS CORP.
  1. Release the J-strips that retain the cover to the seat pan.
  2. Compress the foam and partially remove the seat cover assembly from the seat pan.
    3. IMPORTANT: When separating the seat cover retaining strips, do not pull the adhesive-backed strip from the seat pad.
  3. Remove the cover from the cushion by separating the retaining strips.
  4. Separate and remove the cushion and cover assembly from the seat pan.
  5. Release the reinforcement bar from the hog-rings.
  6. Remove the cover from the cushion.
scientia non olet · About LEMON Manuals