LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1395 (Seat System) >> Repair Instructions >> Seat Cushion Bracket Replacement - Rear No. 1 (TrailBlazer, Envoy, Bravada) >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Oldsmobile Bravada, 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the rear seat cushion assembly from the vehicle. Refer to Seat Cushion Replacement - Rear No. 1 (TrailBlazer, Envoy, Bravada) .
    2. Fig 1: Locating Seat Cushion Bracket Assembly To Seat Cushion Bolts (TrailBlazer, Envoy, Bravada)
    GM753713Courtesy of GENERAL MOTORS CORP.
  2. Remove the 2 bolts securing the bracket assembly to the seat cushion.
    3. Fig 2: Removing/Installing Seat Cushion Bracket Assembly To Seat Cushion (TrailBlazer, Envoy, Bravada)
    GM753711Courtesy of GENERAL MOTORS CORP.
  3. Remove the bracket assembly from the seat cushion.
scientia non olet · About LEMON Manuals