Removal Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Oldsmobile Bravada, 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Seat Belt Side Buckle & Retaining Nut

Courtesy of GENERAL MOTORS CORP.

Remove the screws from the inboard/outboard rear seat back cushion hinge covers.

Fig 2: View Of Rear Center Seat Belt Anchor Nut

Courtesy of GENERAL MOTORS CORP.

Remove the rear seat belt anchor nut (2).
Remove the seat back cover and pad high enough to expose the seat back cushion mounting bolts. Refer to Seat Back Cover and Pad Replacement - Rear No. 1 (TrailBlazer, Envoy, Bravada) or Seat Back Cover and Pad Replacement - Rear No. 1 (TrailBlazer EXT, Envoy XL, Envoy XUV) .

Fig 3: Seat Recliner (Uncovered)

Courtesy of GENERAL MOTORS CORP.

Remove the seat back mounting bolts (2) securing the rear seat back frame to the inboard/outboard rear seat back cushion hinge assembly.
Remove the seat back assembly.