LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1395 (Seat System) >> Repair Instructions >> Seat Back Release Latch Replacement - Rear No. 1 (TrailBlazer EXT, Envoy XL, Envoy XUV) >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Oldsmobile Bravada, 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the head restraint. Refer to Head Restraint Replacement - Rear Seat .
    2. Fig 1: Locating Seat Back Release Latch Handle To Seat Back Screws
    GM893514Courtesy of GENERAL MOTORS CORP.
  2. Remove the 2 screws securing the seat back release latch handle to the seat back.
  3. Remove the seat back cover and pad. Refer to Seat Back Cover and Pad Replacement - Rear No. 1 (TrailBlazer, Envoy, Bravada)  or Seat Back Cover and Pad Replacement - Rear No. 1 (TrailBlazer EXT, Envoy XL, Envoy XUV) .
    4. Fig 2: Locating Seat Back Release Latch Cable Clips
    GM893519Courtesy of GENERAL MOTORS CORP.
  4. Remove the clips (2) securing the seat back release latch cable to the seat back frame.
  5. Remove the cable from the slot in the cam (1).
scientia non olet · About LEMON Manuals