LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1395 (Seat System) >> Repair Instructions >> Seat Back Hinge Replacement - Rear No. 1 (TrailBlazer EXT, Envoy XL, Envoy XUV) >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Oldsmobile Bravada, 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the seat from the vehicle. Refer to Seat Replacement - Rear No. 1 (TrailBlazer EXT, Envoy XL, Envoy XUV) .
  2. Remove the inboard/outboard rear seat back cushion latch covers. Refer to Seat Back Hinge Cover Replacement - Rear No. 1 .
    3. Fig 1: View Of Rear Center Seat Belt Anchor Nut
    GM828141Courtesy of GENERAL MOTORS CORP.
  3. Remove the rear center seat belt anchor nut (2), if replacing the left-hand seat inboard hinge.
    4. Fig 2: Identifying Rear Center Seat Belt Anchor Nut
    GM831437Courtesy of GENERAL MOTORS CORP.
  4. Remove the seat belt side buckle nut (2), if replacing the right-hand seat inboard hinge.
  5. Remove the seat back cover and pad high enough to expose the seat back mounting bolts. Refer toSeat Back Cover and Pad Replacement - Rear No. 1 (TrailBlazer, Envoy, Bravada)  or Seat Back Cover and Pad Replacement - Rear No. 1 (TrailBlazer EXT, Envoy XL, Envoy XUV) .
    6. Fig 3: Seat Recliner (Uncovered)
    GM828223Courtesy of GENERAL MOTORS CORP.
  6. Remove the seat back mounting bolts (2) securing the rear seat back frame to the inboard/outboard rear seat back hinge assembly.
  7. Remove the seat cushion mounting bolts (1) securing the rear seat cushion frame to the inboard/outboard rear seat back hinge assembly.
  8. Remove the seat back assembly.
scientia non olet · About LEMON Manuals