LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1395 (Seat System) >> Repair Instructions >> Seat Adjuster Mechanism Replacement - Manual >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Oldsmobile Bravada, 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front bucket seat assembly from the vehicle. Refer to Seat Replacement - Front Bucket .
  2. Remove the seat cushion trim panel. Refer to Seat Cushion Outer Trim Panel Replacement .
  3. Remove the lumbar support cable from the seat adjuster. Refer to Lumbar Support Cable Replacement .
    4. Fig 1: Locating SIR Harness
    GM755831Courtesy of GENERAL MOTORS CORP.
  4. Remove the SIR harness connector (1) from the seat adjuster bracket.
  5. Remove the SIR harness from the harness clips (2) and remove the SIR harness from the seat adjuster.
  6. Remove the seat back from the seat adjuster. Refer to Seat Back Replacement - Front .
    7. Fig 2: Locating Seat Belt Buckle Nut
    GM755837Courtesy of GENERAL MOTORS CORP.
  7. Remove the seat belt buckle nut (1).
    8. Fig 3: Locating Seat Pan To Power Seat Adjuster Frame Nuts
    GM755845Courtesy of GENERAL MOTORS CORP.
  8. Remove the 4 nuts that secure the seat pan to the power seat adjuster frame.
  9. Remove the seat back. Refer to Seat Back Replacement - Front .
scientia non olet · About LEMON Manuals