LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1395 (Seat System) >> Repair Instructions >> Seat Adjuster Cross Bar Replacement - Rear No. 2 >> Installation Procedure

Installation Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Oldsmobile Bravada, 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Accessing Seat Back Screws
    GM824159Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  1. Install the rear seat adjuster cross bar (2) to the seat with two bolts (3).

    Tighten:  Tighten the rear seat adjuster cross bar bolts to 25 N.m (18 lb ft).

  2. Install the J-strip (1) to the seat adjuster cross bar (2).
  3. Fig 2: Identifying Seat Back Cushion Extension Panel Strap
    GM824163Courtesy of GENERAL MOTORS CORP.
  4. Hook the seat back cushion extension panel strap (1) to the extension panel (2).