LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1395 (Seat System) >> Repair Instructions >> Lumbar Replacement - Front Seat >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Oldsmobile Bravada, 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front seat from the vehicle. Refer to Seat Replacement - Front Bucket .
  2. Remove the seat back cover and pad. Refer to Seat Back Cover and Pad Replacement - Front .
  3. Remove the seat back panel. Refer to Seat Back Panel Replacement - Front .
  4. Disconnect the electrical connector from the lumbar motor.
  5. Detach the lumbar clip from the top of the seat back frame.
    6. Fig 1: Locating Lumbar Motor Mounting Screw
    GM753526Courtesy of GENERAL MOTORS CORP.
  6. Remove the lumbar motor mounting screw.
  7. Remove the lumbar assembly from the seat.
scientia non olet · About LEMON Manuals