LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1395 (Seat System) >> Repair Instructions >> Head Restraint Guide Replacement - Rear No. 1 >> Installation Procedure

Installation Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Oldsmobile Bravada, 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Locating Head Restraint Guide Retaining Tab
    GM828219Courtesy of GENERAL MOTORS CORP.
  1. Install the head restraint guides by pushing the guides into the frame until the retaining tabs (1) lock the guide in place.
  2. Install the seat back cover and pad to the seat back. Refer toSeat Back Cover and Pad Replacement - Rear No. 1 (TrailBlazer, Envoy, Bravada)  or Seat Back Cover and Pad Replacement - Rear No. 1 (TrailBlazer EXT, Envoy XL, Envoy XUV) .
  3. Install the head restraint. Refer to Head Restraint Replacement - Rear Seat .
scientia non olet · About LEMON Manuals