LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1395 (Seat System) >> Repair Instructions >> Head Restraint Guide Assembly Replacement - Rear No. 2 >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Oldsmobile Bravada, 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the head restraint assembly. Refer to Head Restraint Replacement - Rear Seat .
  2. Remove the seat back cover and pad to expose the seat back frame. Refer to Seat Back Cover and Pad Replacement - Rear No. 2 .
    3. Fig 1: Accessing Head Rest Restraint Guides
    GM824173Courtesy of GENERAL MOTORS CORP.
  3. Gently pull the pad away from the seat back frame. It may be glued in places from its original assembly.
  4. Remove the head rest restraint guides by squeezing the tabs on the bottom of the guide together and pulling the guide upward out of the seat.
scientia non olet · About LEMON Manuals