Removal Procedure
WARNING: This page is about a different car, the 2002 Oldsmobile Bravada, 2002 GMC Envoy XL, 2002 GMC Envoy, and 2002 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
- Carefully move the outside rear view mirror (ORVM) assembly forward in order to gain access to the lens retaining screw (1) located underneath the assembly, near the pivot point.
- Remove the lens retaining screw.
- Remove the lens from the ORVM assembly.
- Remove the socket and the lamp from the lens by turning the socket counterclockwise.
- If replacing the bulb, remove the bulb from the socket.