LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1391 (Frame & Underbody) >> Repair Instructions >> Transmission Support Replacement >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise the vehicle. Refer to LIFTING & JACKING THE VEHICLE .
  2. Support the transmission with a transmission jack.
    3. Fig 1: Identifying Transmission Mount Nuts
    GM647997Courtesy of GENERAL MOTORS CORP.
  3. Remove the nut retaining the transmission mount to the transmission support.
  4. Raise the rear of the transmission.
    5. Fig 2: View Of Transmission Crossmember
    GM702036Courtesy of GENERAL MOTORS CORP.
  5. Remove the bolts and the nuts retaining the transmission support to the frame. (15 series)
    6. Fig 3: Identifying Crossmember & Bolts
    GM652595Courtesy of GENERAL MOTORS CORP.
  6. Remove the bolts and the nuts retaining the transmission support to the frame. (25/35 series)
  7. Remove the transmission support from the frame.
scientia non olet · About LEMON Manuals