LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1391 (Frame & Underbody) >> Repair Instructions >> Trailer Hitch Replacement >> Installation Procedure

Installation Procedure

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the hitch platform to the vehicle.
  2. Fig 1: Installing Hitch Platform & Bolts
    GM349060Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to FASTENER NOTICE .
  3. Install the platform hitch bolts to the frame rails and the rear bumper.

    Tighten:  Tighten the bolts to 125 N.m (92 lb ft).

  4. Fig 2: Connecting Trailer Wiring Harness
    GM399253Courtesy of GENERAL MOTORS CORP.
  5. Connect the trailer wiring harness.