LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1391 (Frame & Underbody) >> Repair Instructions >> Running Board Replacement (Utility) >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Removing Running Board & Bolts
    GM589387Courtesy of GENERAL MOTORS CORP.
  1. Remove the bolts that attach the running board end caps to the body.
  2. Remove the bolts that secure the running board to the brackets.
  3. Remove the running boards from the vehicle.
    4. Fig 2: Removing Brackets & Bolts
    GM589389Courtesy of GENERAL MOTORS CORP.
  4. Loosen the bolts retaining the HVAC pipes in order to facilitate the removal the assist step brackets. Refer to HEATER PIPE .
  5. Remove the bolts attaching the brackets to the vehicle.
  6. Remove the brackets.
scientia non olet · About LEMON Manuals