Frame Control Hole Description
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Control holes are round or oval holes located in the underbody structure sections, the upper body, and the body sides. Some control holes can be identified from other holes by a turned up lip on the inside of the hole. This reinforced lip reduces the possibility of hole distortion and increases accuracy during assembly. Utilize control points whenever possible when measuring underbody dimensions, in order to obtain the most accurate readings.