LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1390 (Engine Exhaust System) >> Repair Instructions >> Floor Panel Heat Shield Replacement >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View of Exhaust Front Heat Shield
    GM707400Courtesy of GENERAL MOTORS CORP.
  1. Remove the exhaust manifold pipe, if necessary. Refer to Exhaust Manifold Pipe Replacement (6.0L, and 8.1L Engines) .
  2. Remove the catalytic converter, if necessary. Refer to Catalytic Converter Replacement (4.8L and 5.3L Engines)  or Catalytic Converter Replacement (6.0L and 8.1L Engines) .
  3. Remove the exhaust front heat shield nuts.
  4. Remove the exhaust front heat shield from the studs.
  5. Fig 2: View of Crew Cab Pick-up Truck Exhaust Heat Shields
    GM707411Courtesy of GENERAL MOTORS CORP.
  6. If vehicle is a crew cab pick-up truck, remove the exhaust heat shield nuts.
  7. Remove the exhaust heat shield(s) from the studs.
  8. Fig 3: View of SUV Exhaust Heat Shield
    GM707415Courtesy of GENERAL MOTORS CORP.
  9. If vehicle is a sport utility vehicle, remove the exhaust heat shield nuts.
  10. Remove the exhaust heat shield from the studs.