Removal Procedure

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Exploded View of Exhaust Manifold

Courtesy of GENERAL MOTORS CORP.

Remove the ignition coils. Refer to IGNITION COILS .
Remove the spark plugs. Refer to SPARK PLUGS .
Raise and suitably support the vehicle. Refer to LIFTING & JACKING THE VEHICLE .
Remove the exhaust manifold pipe nuts.
Lower the vehicle.

Fig 2: Identifying Exhaust Manifold, Bolts, & Gasket

Courtesy of GENERAL MOTORS CORP.

Remove the exhaust manifold bolts, manifold, and gasket.
Discard the gasket.

Fig 3: View Of Left Exhaust Manifold Heat Shield & Bolts

Courtesy of GENERAL MOTORS CORP.

Remove the heat shield bolts (3), and shield (2) from the exhaust manifold (1), if necessary.
Clean and inspect the exhaust manifold, if the manifold is not being replaced. Refer to EXHAUST MANIFOLD CLEANING AND INSPECTION .