Quick Connect Fittings (Metal Collar): Installation
WARNING: This page is about a different car, the 2002 GMC Sierra, 2002 GMC Cab & Chassis Sierra, 2002 Chevrolet Silverado, and 2002 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
Apply a few drops of clean engine oil to the male pipe end. Push both sides of the fitting together in order to snap the retaining tabs into place. Once installed, pull on both sides of the fitting to ensure the connection is secure. Install the retainer to the quick-connect fitting. Install the fuel filler cap. Connect the negative battery cable.