Fuel Injector: Removal
WARNING: This page is about a different car, the 2002 GMC Sierra, 2002 GMC Cab & Chassis Sierra, 2002 Chevrolet Silverado, and 2002 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
Remove the lower valve rocker arm cover. Remove the return line from injectors. Remove the retaining bolt from the injector bracket. Install the Fuel Injector Puller (J 44639) on the injector retainer bracket. Confirm which side of the banjo washers have the largest hole. Install a wrench on the J 44639 and pry away from the fuel injector. Remove the faulty injectors. See Figure. Remove the copper compression washer from injection hole if the washer did not remove with the injector.