LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1380 (Heating, Ventilation And Air Conditioning) >> Repair Instructions >> Thermal Expansion Valve Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: O-Rings, Expansion Valve, Evaporator Tube Assembly And Bolts
    GM834871Courtesy of GENERAL MOTORS CORP.
  1. Discharge and recover the refrigerant. Refer to Refrigerant Recovery and Recharging .
  2. Remove the evaporator inlet and outlet hoses from the evaporator tube assembly (3).
  3. Remove the grommet and insulator.
  4. Remove the two bolts (4) and expansion valve (2) from the evaporator.
  5. Remove and discard the O-rings (1).
scientia non olet · About LEMON Manuals