LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1380 (Heating, Ventilation And Air Conditioning) >> Repair Instructions >> Compressor Pressure Relief Valve Install

Compressor Pressure Relief Valve Install

WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Compressor Pressure Relief Valve
    GM787375Courtesy of GENERAL MOTORS CORP.
  1. Clean the pressure relief valve seat area on the A/C compressor.
  2. Lubricate the O-ring of the new pressure relief valve with clean refrigerant oil.
    3. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the new pressure relief valve into the A/C compressor.

    Tighten:  Tighten the pressure relief valve to 7 N.m (60 lb in).

scientia non olet · About LEMON Manuals