LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1380 (Heating, Ventilation And Air Conditioning) >> Repair Instructions >> Blower Motor Resistor Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the instrument panel compartment. Refer to Compartment Replacement - Instrument Panel (I/P) in Instrument Panel, Gages and Console.
    2. Fig 1: Blower Motor Resistor Electrical Connector, Blower Case, Motor And Screws
    GM325437Courtesy of GENERAL MOTORS CORP.
  2. Disconnect the blower motor resistor electrical connector.
  3. Remove the 2 screws and the blower motor resistor (4) from the blower case.
scientia non olet · About LEMON Manuals