LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1380 (Heating, Ventilation And Air Conditioning) >> Repair Instructions >> Air Distribution Duct Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Lower Air Distribution Duct And Push Clips
    GM837610Courtesy of GENERAL MOTORS CORP.
  1. Install the lower air distribution duct (2) to the HVAC module assembly.
  2. Connect the lower air distribution duct to the defroster duct.
  3. Secure the lower air distribution duct with the four push clips (1).
  4. Fig 2: Upper IP, Air Deflector, Air Outlet Duct And Screws
    GM836333Courtesy of GENERAL MOTORS CORP.
  5. Install the upper air distribution duct (2) to the upper IP panel (5). Secure with the four screws (1)
  6. Install the upper IP assembly. Refer to Trim Pad Replacement - Instrument Panel (I/P) Upper in Instrument Panel, Gages and Console.