Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Clutch Reservoir Tube

Courtesy of GENERAL MOTORS CORP.

Remove the brake booster assembly from the vehicle. Refer to Hydraulic Clutch Bleeding in Hydraulic Brakes.
Disconnect the clutch reservoir tube from the clutch master cylinder assembly.

Fig 2: Clutch Master Cylinder Pipe

Courtesy of GENERAL MOTORS CORP.

Disconnect the pipe from the clutch master cylinder.

Fig 3: Removing/Installing Clevis Clip And Pin

Courtesy of GENERAL MOTORS CORP.

Remove the clutch master cylinder push rod clevis pin and clip.

Fig 4: Clutch Master Cylinder And Retaining Nuts

Courtesy of GENERAL MOTORS CORP.

Remove the 2 clutch master cylinder retaining nuts.
Remove the clutch master cylinder from the vehicle.