LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1377 (Engine Cooling System) >> Repair Instructions >> Radiator Hose Replacement - Inlet >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
  1. Drain the cooling system. Refer to Draining and Filling Cooling System .
  2. Loosen and remove the radiator inlet hose from the radiator.
  3. Disconnect the PCV hose to gain access to the radiator inlet hose at the cylinder head.
  4. Loosen and remove the radiator inlet hose from the cylinder head.
  5. Remove the radiator hose.
scientia non olet · About LEMON Manuals