LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1377 (Engine Cooling System) >> Repair Instructions >> Cooling Fan Replacement - Electric >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Reservoir Hose And Fan Motor Electrical Connector
    GM886414Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the reservoir hose from the radiator.
  2. Disconnect the fan motor electrical connector.
    3. Fig 2: Air Pump Outlet Pipe Hose And Bolts
    GM1260635Courtesy of GENERAL MOTORS CORP.
  3. If equipped with an air pump:
    1. Disconnect the 2 hoses from the air pump outlet pipe (1).
    2. Remove the 2 bolts from the air pump outlet pipe (2).
  4. Disconnect the 2 fan motor electrical harness clamps from the fan shroud.
  5. Remove the 2 fan shroud bolts.
  6. Remove the fan shroud and motor assembly.
  7. Remove the fan retaining nut.
  8. Remove the 2 radiator fan mount bolts.
  9. Remove the radiator fan motor.
scientia non olet · About LEMON Manuals