Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.

If the vehicle has rear disc brakes, remove the rear brake rotor. Refer to Brake Rotor Replacement - Rear in Disc Brakes.
If the vehicle has rear drum brakes, remove the brake drum. Refer to Brake Drum Replacement in Drum Brakes.

Fig 1: Speed Sensor Connector And Bolts (FWD)

Courtesy of GENERAL MOTORS CORP.

If the vehicle has ABS, disconnect the rear wheel speed sensor connector (3). Position the connector to the side.
Remove the 4 bolts (1,2,4,5).
Remove the wheel bearing and hub assembly.